Maintenance method of hole opening machine

1, check the hole when the machine spindle hole machine for medium fluid conveying pipe subjected to immersion when fully extended to spindle and clean, and grease or oil lubrication

2, in the opening machine storage or back to the rack, the spindle will be fully raised and clean, and painted with grease or grease, covered with protective cover

3, if long-term storage machine, the spindle should be extended, wipe clean, and use the quality rust proof grease coating, covered with protective cover

4, if the long-term storage is also open, should be extended every three months, the main shaft, rotating a few laps, and then back to the main shaft, covered with protective cover

5. Check the gear box regularly and add lubricating oil when necessary. Check the gear box. The opening machine should be placed horizontally

6, opening Jiruo frequently used lubricating oil should be replaced once every 3-6 months; to remove the cover to check whether the internal parts wear and tear

7. Proper lubricant should be filled before each opening operation and storage of the opening

8. The packing gland nut should be removed, lubricated and reinstalled before placing the hole machine in storage

9, should always check whether the packing well maintained